STENN-GIO panels are famous for their light weight , efficiency & easy to use properties.
For example a 600 x 3000 mm panel weighs only 71.8 kg and its safe working pressure is 80 kn/m2.
STENN-GIO panels come in multiples of 100mm ranging from 300 mm wide to 900mm wide.
It is unique for the following reasons:
- Because opposite panels don’t have to be equal in size due to the system ability to have tie rods placed at 50mm spacing across the width ; a panel of 600 width can be place opposite to a panel of 900 width or any other size panel and vise versa.
- Because wall panels and column panels are the same ; same panel can be used for columns , walls and cores.
- Columns are adjustable in size at 50mm increments.
- No fillers between panels are needed in this system.
STENN-PRO system is compatible with any other similar system in the market.H20 Timber beams or GTX L.V.L.beams are used along with galvanized steel Walers & acce-ssories.
-Cost efficient and less follow up cost.
-Panels easily matched together for best utilization of the formwork.
-Multiple panels can be lifted as one for fast positioning and less crane time.
-No joints are visible after de-shuttering.
-Less tie-rods to be set = faster forming work.
-Reduction in labor cost for pre and post casting work.
-Provide working conditions compliant
with Health and Safty regulations.
-Adjustable from 200-1200mm in width.
-Can easily achive fair-faced concrete quality.
-Plywood need not to be changed for >100uses.
-Columns can be crane lifted 1 peice.
-after pouring,no need for dismantling.
-Panels click-fix together in seconds-no nailing.
-Allowable fresh concrete pressure 100 KN/m.
This climbing system for walls is simple fast and user friendly. The hole system can be lifted together as one, the panels together with the climbing apparatus. Inserts in the concrete wall allow the climbing brackets to be supported, the climbing brackets support in turn the panels, working and recovery platforms
STENN-FIGO RETAINING WALL SYSTEM . This system is referred to as the "HEAVY CONCRETE RETAINER".It consists of heavy structural steel trusses that support Steel panels that are normally 2.4 m wide by 3.3m high . It is designed to Retain concrete as high as 8.0 m high and unlimited concrete thickness.
Single sided wall system used in basements for retaining walls.It uses the same components as the STENN-PRO system for walls and columns, so it is advisable to use STENN-PRO-L , if you are using STENN-PRO system for the walls and columns.
This is a curved wall system using Timber beam and steel Walers and accessories.This system can cater for smaller diameters down to 8 meters and is easy to handle due to Light weight and easiness in adjustability to different diameters.
When quality of finish and speed is required,STENN-STEELO is the ultimate solution.
-It can be adjusted to any form or shape architacts engineers can imagine;circular,concave,convex,apple shape and even straight walls.
-It is ideal for high watertanks and Dams with its very high climbing system.
-Ideal for vertical walls and inclind walls.
-The steel faced formwork results in mirror finish concrete.
This system is unique in its simplicity, praticality and rigidity. No matter what the table sise is,it is standing on four legs. The legs consist of 50 KN props supporting a solid 200x80 LVL Beam taking the load from the GTX joists that are in turn taking the load of the concrete slab.
This system is unique in its simplicity, It consists of 3 simple items: H20 Beam, U-head and 50 KN Prop. It is a hand-operated system with extremely light components made of galvanized steel.